Умная камера Netatmo presen с распознанием людей
Состав:
Нанд 4гига
CPU A83T
AXP813
Управление камерой SP01
Купил на аукционе, проблемную (стоит овер дохрена рабочая)
Два раза удалось ее завести (настроить) и работала, (но мог быть черный экран иногда)

Сейчас, при загрузке светится подсветка и не гаснет (не проходит чек). На официальном сайте, пишет что ошибка карты.

Менял уже несколько карт ,форматировал. Карту видит, тк он делает партиции под себя.

Без карты работать не может (там буфер данных)

Плата ок, как и питания . (следов влаги не обнаружил)
Заменил гнездо, карты но ничего не дало.

Подпаялся до RX,TX получил такой лог
Консоль запустил
[ Содержимое доступно только зарегистрированным пользователям. ]

Немного, о софте [ Содержимое доступно только зарегистрированным пользователям. ]

Фото платы [ Содержимое доступно только зарегистрированным пользователям. ]

Если запустить другой бутлоадер то проц висит. Есть подозрения что дохла нанд.
Софта нет чтоб скачать (все это автоматически)

Софт по такой схеме устройство качает

curl –silent –data ‘mac=70:ee:de:ad:be:ef&secret=$SECRET&fw=73&hw_ver sion=246’ [ Содержимое доступно только зарегистрированным пользователям. ]
{"body":{"timezone":"Europe\/Berlin","share_info":false,"firmware_info":{"fw_ur l":"https:\/\/fw-556112.c.cdn77.org\/nsc-v250-hk-fix-faceconvert-prod.zip"},"home_id":"5bd724ed2d3e046ad38bd32f"}," status":"ok","time_exec":0.007094144821167,"time_s erver":1540826441}
Giving us a static still valid URL to download the, at the moment of writing, newest firmware image as ZIP-file.
Смог вытащить свой
SECRET=5da44e8f6139c9b1fc75c67818ae3faa
MAC=70:ee:50:2d:70:8e
CUR_FW_VERSION=155
APITARGET=apicom.netatmo.net
HW_VERSION=239

При пробе скачать софт

error":{"code":21,"message":"Non associated device"}}

Но мой продукт не зарегистрирован (я его сам удалил из системы когда камера работала еще) и я не могу скачать софт.

Так же пробовал рековери на mmc
Но это стандартные recovery , без файла прошивки ничего не вернет - в лучшем случае можно очистить кэш и данные пользователя.

По простое камеры 20 мин гаснет подсветка и есть такой лог


Лог

29.558050] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 29.565717] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 29.573384] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 29.582307] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 29.591863] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 29.684449] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 29.694559] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 29.704866] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 29.717009] mmc2: new high speed SDIO card at address 0001
[ 29.723419] *******************sdio init ok*******************
[ 29.739433] bcmsdh_register: register client driver
[ 29.744919] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 29.750300] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 29.755608] bus num (host idx)=2, slot num (rca)=1
[ 29.760906] found adapter info 'DHD generic adapter'
[ 29.766790] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 53, SBE !!
[ 29.774888] [mmc]: found data error, need to send stop command !!
[ 29.781637] [mmc]: *** sunxi_mci_send_manual_stop(L881): sdc 1 send stop command failed
[ 29.790527] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 29.796991] F1 signature read @0x18000000=0xffffffff
[ 29.802735] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 53, SBE !!
[ 29.810838] [mmc]: found data error, need to send stop command !!
[ 29.817597] [mmc]: *** sunxi_mci_send_manual_stop(L881): sdc 1 send stop command failed
[ 29.826479] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 29.832936] Found chip of unknown type (0xffffffff)
[ 29.838341] dhdsdio_probe_attach: si_attach failed!
[ 29.843735] dhdsdio_probe: dhdsdio_probe_attach failed
[ 29.849524] bcmsdh_probe: device attach failed
[ 29.854438] sdioh_probe: bcmsdh_probe failed
[ 29.859255] bcmsdh_sdmmc: probe of mmc2:0001:2 failed with error -12
[ 41.860033] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 41.868166] wifi_platform_set_power = 0
[ 41.872408] ======== PULL WL_REG_ON LOW! ========
[ 41.877618] [wifi_pm]: wifi power off
[ 41.881670] wifi_platform_bus_enumerate device present 0
[ 41.887555] ======== Card detection to remove SDIO card! ========
[ 41.894324] mmc2: req failed (CMD7): -123, retrying...
[ 41.894414] unregister wifi platform drivers
[ 41.894420] dhd_module_init: Failed to load the driver, try cnt 1
[ 41.894518] ======== bcm_wlan_set_plat_data ========
[ 41.894527] dhd_wifi_platform_load: Enter
[ 41.894542] Power-up adapter 'DHD generic adapter'
[ 41.926755] mmc2: req failed (CMD7): -123, retrying...
[ 41.932451] mmc2: req failed (CMD7): -123, retrying...
[ 41.938159] dummy_sdmmc: probe of mmc2:0001:1 failed with error -123
[ 41.945228] dummy_sdmmc: probe of mmc2:0001:2 failed with error -123
[ 41.952287] wifi_platform_set_power = 1
[ 41.952317] mmc2: card 0001 removed
[ 41.952375] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 41.952397] sunxi pconf set pin [PG0] func to [7]
[ 41.952415] sunxi pconf set pin [PG1] func to [7]
[ 41.952433] sunxi pconf set pin [PG2] func to [7]
[ 41.952451] sunxi pconf set pin [PG3] func to [7]
[ 41.952470] sunxi pconf set pin [PG4] func to [7]
[ 41.952488] sunxi pconf set pin [PG5] func to [7]
[ 41.952500] [mmc]: sdc1 power_supply is null
[ 42.005998] ======== PULL WL_REG_ON HIGH! ========
[ 42.011308] [wifi_pm]: wifi power on
[ 42.320026] wifi_platform_bus_enumerate device present 1
[ 42.325911] ======== Card detection to detect SDIO card! ========
[ 42.332664] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 42.343808] [mmc]: sdc1 power_supply is null
[ 42.348551] sunxi pconf set pin [PG0] func to [2]
[ 42.353762] sunxi pconf set pin [PG1] func to [2]
[ 42.358986] sunxi pconf set pin [PG2] func to [2]
[ 42.364194] sunxi pconf set pin [PG3] func to [2]
[ 42.369418] sunxi pconf set pin [PG4] func to [2]
[ 42.374627] sunxi pconf set pin [PG5] func to [2]
[ 42.400022] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 42.432344] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 52, RTO !!
[ 42.441262] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 52, RTO !!
[ 42.449382] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 42.461949] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 42.473958] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 8, RTO !!
[ 42.481982] *******************Try sdio*******************
[ 42.488351] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 42.508026] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 42.515693] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 42.523358] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 42.532277] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 42.541833] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 42.634410] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 42.644518] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 42.654825] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 42.666971] mmc2: new high speed SDIO card at address 0001
[ 42.673387] *******************sdio init ok*******************
[ 42.689401] bcmsdh_register: register client driver
[ 42.694888] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 42.700267] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 42.705575] bus num (host idx)=2, slot num (rca)=1
[ 42.710874] found adapter info 'DHD generic adapter'
[ 42.716751] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 53, SBE !!
[ 42.724850] [mmc]: found data error, need to send stop command !!
[ 42.731601] [mmc]: *** sunxi_mci_send_manual_stop(L881): sdc 1 send stop command failed
[ 42.740491] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 42.746955] F1 signature read @0x18000000=0xffffffff
[ 42.752699] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 1 err, cmd 53, SBE !!
[ 42.760803] [mmc]: found data error, need to send stop command !!
[ 42.767562] [mmc]: *** sunxi_mci_send_manual_stop(L881): sdc 1 send stop command failed
[ 42.776446] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 42.782905] Found chip of unknown type (0xffffffff)
[ 42.788309] dhdsdio_probe_attach: si_attach failed!
[ 42.793705] dhdsdio_probe: dhdsdio_probe_attach failed
[ 42.799492] bcmsdh_probe: device attach failed
[ 42.804408] sdioh_probe: bcmsdh_probe failed
[ 42.809228] bcmsdh_sdmmc: probe of mmc2:0001:2 failed with error -12
[ 54.810027] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 54.818161] wifi_platform_set_power = 0
[ 54.822403] ======== PULL WL_REG_ON LOW! ========
[ 54.827613] [wifi_pm]: wifi power off
[ 54.831664] wifi_platform_bus_enumerate device present 0
[ 54.837549] ======== Card detection to remove SDIO card! ========
[ 54.844318] mmc2: req failed (CMD7): -123, retrying...
[ 54.844408] unregister wifi platform drivers
[ 54.844414] dhd_module_init: Failed to load the driver, try cnt 0
[ 54.844433] dhd_module_init: Failed to load driver max retry reached**
[ 54.844438] dhd_module_init: Exit err=-62
[ 54.844753] rtc_gettime(340): read time 1970-1-2 0:31:25
[ 54.879006] rtc0 rtc0: setting system clock to 1970-01-02 00:31:25 UTC (88285)
[ 54.879095] mmc2: req failed (CMD7): -123, retrying...
[ 54.879102] mmc2: req failed (CMD7): -123, retrying...
[ 54.879257] mmc2: card 0001 removed
[ 54.879315] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 54.879336] sunxi pconf set pin [PG0] func to [7]
[ 54.879354] sunxi pconf set pin [PG1] func to [7]
[ 54.879373] sunxi pconf set pin [PG2] func to [7]
[ 54.879391] sunxi pconf set pin [PG3] func to [7]
[ 54.879409] sunxi pconf set pin [PG4] func to [7]
[ 54.879427] sunxi pconf set pin [PG5] func to [7]
[ 54.879439] [mmc]: sdc1 power_supply is null
[ 54.948844] sunxi_get_soc_bin: slow chip
[ 54.953646] CPU Budget:Register notifier
[ 54.957995] CPU Budget:register Success
[ 54.962265] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 54.976033] =========GPS========= :gsp not used in configuration
[ 54.982733] ALSA device list:
[ 54.986017] #0: snddaudio
[ 54.989107] #1: sndhdmi
[ 54.992676] Freeing init memory: 308K
[ 55.002754] SELinux: 512 avtab hash slots, 1395 rules.
[ 55.008974] SELinux: 512 avtab hash slots, 1395 rules.
[ 55.014721] SELinux: 1 users, 2 roles, 292 types, 1 bools, 1 sens, 1024 cats
[ 55.022657] SELinux: 84 classes, 1395 rules
[ 55.028593] SELinux: Completing initialization.
[ 55.033740] SELinux: Setting up existing superblocks.
[ 55.039454] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 55.047391] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 55.055559] SELinux: initialized (dev bdev, type bdev), not configured for labeling
[ 55.064082] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 55.071835] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 55.079858] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 55.088914] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 55.101614] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 55.109250] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 55.116911] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[ 55.126968] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 55.135210] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 55.143987] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 55.152041] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 55.386771] type=1403 audit(88286.029:2): policy loaded auid=4294967295 ses=4294967295
[ 55.395783] SELinux: Loaded policy from /sepolicy
[ 55.403094] type=1404 audit(88286.049:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 56.682975] init: /init.rc: 156: invalid command 'echo'
[ 56.689882] init: could not import file 'init.radio.rc' from '/init.sun8i.rc'
[ 56.698068] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 56.789471] init: /dev/hw_random not found
[ 56.805914] [NAND]nand init start, nand0_used_flag is 0
[ 56.811767] [NAND]nand driver is disabled
[ 56.833713] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 56.843600] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 56.852056] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 56.860269] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 56.960148] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 57.040121] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 57.110168] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 57.120703] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.129382] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.137678] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.145940] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.154202] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.162460] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.170730] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 57.180222] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 57.194724] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 57.203737] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
[ 57.220086] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 57.231877] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[ 57.360072] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
[ 57.399898] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 57.405101] e2fsck: /dev/block/by-name/cache: clean, 18/49152 files, 6363/196608 blocks
[ 57.420874] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
[ 57.431927] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[ 57.445728] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 57.457432] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
[ 57.560061] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/data
[ 57.579737] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
[ 57.584901] e2fsck: /dev/block/by-name/data: clean, 1280/65536 files, 39987/262144 blocks
[ 57.598867] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
[ 57.611348] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
[ 57.625451] enter tr_probe
[ 57.628476] exit tr_probe
[ 57.677928] sunxi_get_soc_bin: slow chip
[ 57.700382] [VFE]cci probe start cci_sel = 0!
[ 57.705254] [VFE]cci probe end cci_sel = 0!
[ 57.709943] [VFE]cci_init end
[ 57.749422] [VFE]Welcome to Video Front End driver
[ 57.755149] [VFE]pdev->id = 0
[ 57.758434] [VFE]dev->mipi_sel = 0
[ 57.762230] [VFE]dev->vip_sel = 0
[ 57.765898] [VFE]dev->isp_sel = 0
[ 57.776256] [VFE_WARN]vfe vpu clock is null
[ 57.787258] sunxi pconf set pin [PE16] func to [1]
[ 57.792595] sunxi pconf set pin [PE17] func to [1]
[ 57.797913] sunxi pconf set pin [PE1] func to [2]
[ 57.803137] [VFE]..........................vfe clk open!.......................
[ 57.811526] [ISP] isp platform_id = 4!
[ 57.815768] [VFE]vfe_init end
[ 57.820049] [VFE]probe_work_handle start!
[ 57.824496] [VFE]v4l2 subdev register input_num = 0
[ 57.829943] axp81x_dldo3: Failed to create debugfs directory
[ 57.836331] axp81x_eldo1: Failed to create debugfs directory
[ 57.842644] [VFE]vfe sensor detect start! input_num = 0
[ 57.848457] [VFE]Find sensor name is "ov4689", i2c address is 6c, type is "RAW" !
[ 57.856786] [VFE]Sub device register "ov4689" i2c_addr = 0x6c start!
[ 57.863858] [VFE_ERR]Error registering v4l2 subdevice No such device!
[ 57.871023] [VFE_ERR]vfe sensor register check error at input_num = 0
[ 57.878181] [VFE]read ini start
[ 57.881726] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_test_param.ini"
[ 57.926868] [GPIO] GPIO entry: PL8 (360) mul_sel 1 pull -1 drv_level -1 data 1
[ 57.934956] sunxi pconf set pin [PL8] func to [1]
[ 57.940219] [GPIO] GPIO entry: PL9 (361) mul_sel 1 pull -1 drv_level -1 data 1
[ 57.948241] sunxi pconf set pin [PL9] func to [1]
[ 57.953497] [GPIO] GPIO entry: PE18 (146) mul_sel 1 pull -1 drv_level -1 data 1
[ 57.959071] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_3a_param.ini"
[ 57.970144] sunxi pconf set pin [PE18] func to [1]
[ 57.975472] [GPIO] GPIO entry: PE19 (147) mul_sel 1 pull -1 drv_level -1 data 1
[ 57.983624] sunxi pconf set pin [PE19] func to [1]
[ 57.988950] [GPIO] GPIO entry: PE2 (130) mul_sel 1 pull -1 drv_level -1 data 1
[ 57.996987] sunxi pconf set pin [PE2] func to [1]
[ 58.002238] [GPIO] GPIO entry: PE16 (144) mul_sel 1 pull -1 drv_level -1 data 0
[ 58.010426] sunxi pconf set pin [PE16] func to [1]
[ 58.015753] [GPIO] GPIO entry: PE17 (145) mul_sel 1 pull -1 drv_level -1 data 0
[ 58.023899] sunxi pconf set pin [PE17] func to [1]
[ 58.025690] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_iso_param.ini"
[ 58.041456] [PWM] Got netatmo_ir_led pwm
[ 58.045812] Setting GPIO PL10 mode 2
[ 58.049814] sunxi pconf set pin [PL10] func to [2]
[ 58.055186] [PWM] No more PWMs
[ 58.060157] init: cannot open '/initlogo.rle'
[ 58.091439] init: /dev/hw_random not found
[ 58.092877] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_tuning_param.ini"
[ 58.115079] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
[ 58.116763] rtc_gettime(340): read time 1970-1-2 0:31:28
[ 58.122500] binder: 143:143 transaction failed 29189, size 0-0
[ 58.123430] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 58.131541] init: cannot find '/system/bin/glgps', disabling 'gps-daemon'
[ 58.149870] keyname:ctp_para subname:ctp_power_io ,get error!
[ 58.149882] keyname:ctp_para subname:ctp_wakeup ,get error!
[ 58.151185] get_device_para_value:get subname:mc32x0 error! val.val:0
[ 58.151197] get_detect_list: script_get_item err.support_number = 6.
[ 58.151208] get_device_para_value:get subname:stk831x error! val.val:0
[ 58.151214] get_detect_list: script_get_item err.support_number = 2.
[ 58.153175] get sysconfig para erro!
[ 58.153195] get sysconfig para erro!
[ 58.153208] get sysconfig para erro!
[ 58.153235] wakeup gpio_request is failed
[ 58.176312] [VFE]Fetch table form "/system/etc/hawkview/ov4689/bin/gamma_tbl.bin", gamma num = 1
[ 58.179144] PVR_K: UM DDK-(3052601) and KM DDK-(3052601) match. [ OK ]
[ 58.210096] get sysconfig para erro!
Jan 2 00:31:28 crond[161]: crond: crond (busybox 1.20.0) started, log level 8
[ 58.338473] usbcore: registered new interface driver asix
[ 58.345310] [sunxi_dump_reg]: write rtc reg success, rtc reg 0x3:0x1
[ 58.376412] usbcore: registered new interface driver qf9700
[ 58.394664] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 58.408245] [VFE]V4L2 device registered as video0
[ 58.409230] usbcore: registered new interface driver rtl8150
[ 58.419839] [VFE]..........................vfe clk close!.......................
[ 58.428102] [VFE]probe_work_handle end!
[ 58.437256] usbcore: registered new interface driver cdc_ether
[ 58.621191] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 58.628297] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 58.638105] init: powerctl: cannot expand '${sys.powerctl}'
[ 58.644387] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 58.656660] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
MAC address not found using default: 00:11:22:33:44:54
[ 59.482332] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
IE #3 (DBLIB_IE_SECRET ) not found
[ 59.834110] warning: `zygote' uses 32-bit capabilities (legacy support in use)
Firmware version: 155
NSC[[DBLIB] Unable to open /dev/ramdisk/dblib/dblibsync ! (13)
00:11:22:33:44:54] password: [ 59.927450] gsensor_detect:addr= 0x18,i2c_num:0
[ 59.932863] Read ID value is :51
[ 59.936244] lis3dh_acc Device detected!
[ 59.940912] lis3dh_acc: probe start.
[ 59.949600] lis3dh_acc 1-0018: lis3dh_acc: probed
[ 60.350907] gadget_is_softwinner_otg is not -int
[ 60.356053] gadget_is_softwinner_otg is not -int
[ 60.361280] gadget_is_softwinner_otg is not -int
[ 60.366422] gadget_is_softwinner_otg is not -int
[ 60.372622] g_hid gadget: HID Gadget, version: 2010/03/16
[ 60.378646] g_hid gadget: g_hid ready
[ 60.734590] [RFNSC] probe
[ 60.737513] board_spirit1_power_enable
[ 60.741709] board_spirit1_power_enable 4 pins found
[ 60.747116] [RFNSC] GPIO entry: PG10 (202) mul_sel 6 pull -1 drv_level -1 data -1
[ 60.755470] sunxi pconf set pin [PG10] func to [6]
[ 60.760805] [RFNSC] GPIO entry: PG11 (203) mul_sel 6 pull -1 drv_level -1 data -1
[ 60.769110] sunxi pconf set pin [PG11] func to [6]
[ 60.774453] [RFNSC] GPIO entry: PH9 (233) mul_sel 1 pull -1 drv_level -1 data 1
[ 60.782597] sunxi pconf set pin [PH9] func to [1]
[ 60.787823] [RFNSC] GPIO entry: PE7 (135) mul_sel 1 pull -1 drv_level -1 data 1
[ 60.796015] sunxi pconf set pin [PE7] func to [1]
[ 60.801265] [RFNSC] Configuring board...
[ 61.310076] [RFNSC] Configuring board...
[ 61.820063] [RFNSC] item (null) is not a gpio
[ 61.824975] [SPIRIT1] linking GPIOs to irq 49
[ 61.829806] pin[202] mask : 0(0:disable 1:enable); register addr: 0xf1c20a30
[ 61.838754] irq 0, desc: c08f2200, depth: 1, count: 0, unhandled: 0
[ 61.845699] ->handle_irq(): c00a9f0c, handle_bad_irq+0x0/0x240
[ 61.848682] ->irq_data.chip(): c0921ffc, 0xc0921ffc
[ 61.848682] ->action(): (null)
[ 61.848682] IRQ_NOPROBE set
[ 61.848682] IRQ_NOREQUEST set
[ 61.868049] sunxi pconf set pin [PG10] func to [6]
[ 61.873401] pin[203] mask : 0(0:disable 1:enable); register addr: 0xf1c20a30
[ 61.882292] sunxi pconf set pin [PG11] func to [6]
[ 61.887776] [SPIRIT1] irq set
[ 61.891110] [SPIRIT] initialized
[ 61.895619] [RFNSC DRIVER] Rf configure
[ 61.899869] [RFNSC DRIVER] Rf configure radio
[ 61.904749] [SPIRIT1] SpiritRadioInit on new API
[ 61.911224] [RFNSC DRIVER] Rf configure pkt
[ 61.916087] [RFNSC DRIVER] Rf configure Power
[ 61.921052] Rf configure AFC
[ 61.925651] [RFNSC DRIVER] [SPIRIT] driving GPIO 0
[ 61.930994] [RFNSC DRIVER] [SPIRIT] driving GPIO 1
[ 61.937444] [RFNSC DRIVER] [SPIRIT] Base Frequency = 867999972 Hz
[ 61.944231] [RFNSC DRIVER] [SPIRIT] Freq Dev = 47607 Hz
[ 61.950625] [RFNSC DRIVER] [SPIRIT] Channel : 5
[ 61.956318] [RFNSC DRIVER] [SPIRIT] tx_power : 12 dBm
[ 61.962591] [RFNSC DRIVER] [SPIRIT] Sync Word used : 27 && 17
[ 61.969054] [RFNSC DRIVER] [SPIRIT] My address : ff
[ 61.974491] [RFNSC DRIVER] [SPIRIT] Perform calibration
[ 61.980320] [RFNSC DRIVER] [SPIRIT] Putting the chip in READY state successful (current state READY)
[ 61.991287] [RFNSC DRIVER] [SPIRIT] after calibration words 0 state 3
[ 61.998492] [RFNSC DRIVER] [SPIRIT] Putting the chip in STANDBY state successful (current state STANDBY)
[ 62.330094] sunxi pconf set pin [PL10] func to [2]
[ 62.376727] lis3de_acc accelerometer driver: init
[ 62.382176] lis3de_acc_init i2c twi is 1
[ 62.387867] gsensor_detect enter
[ 62.391833] gsensor_detect enter
[ 62.395614] gsensor_detect:addr= 0x28,i2c_num:0
[ 62.406976] sunxi_i2c_do_xfer()971 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x28)
[ 62.416314] Read ID value is :-70
[ 62.419851] gsensor_detect:addr= 0x29,i2c_num:1
[ 62.427247] sunxi_i2c_do_xfer()971 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
[ 62.436575] Read ID value is :-70
[ 62.440148] gsensor_detect:addr= 0x38,i2c_num:2
[ 62.445643] sunxi_i2c_do_xfer()971 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x38)
[ 62.454965] Read ID value is :-70
[ 62.458491] gsensor_detect:lis3de_acc Device not found, maybe the other gsensor equipment!
[ 62.577276] [VFE]vfe_exit
[ 62.580448] [VFE_WARN]vfe vpu clock is null
[ 62.585175] [VFE_WARN]vfe vpu clock is null
[ 62.589869] [VFE_WARN]os_gpio_release, hdl is NULL
[ 62.595272] [VFE_WARN]os_gpio_release, hdl is NULL
[ 62.600624] [VFE_WARN]os_gpio_release, hdl is NULL
[ 62.605956] [VFE_WARN]os_gpio_release, hdl is NULL
[ 62.611321] [VFE_ERR]vfe dphy clock is null
[ 62.615973] [VFE_WARN]vfe dphy clock source is null
[ 62.621439] sunxi_vfe sunxi_vfe.0: unregistering video0
[ 62.627782] [VFE]vfe_remove ok!
[ 62.631516] [VFE]vfe_device_release
[ 62.635393] [VFE]platform_device_unregister[0]
[ 62.640594] [VFE]platform_driver_unregister
[ 62.645247] [VFE]vfe_release ok!
[ 62.648828] [VFE]vfe_exit end
[ 62.701704] [VFE]Welcome to Video Front End driver
[ 62.707535] [VFE]pdev->id = 0
[ 62.710844] [VFE]dev->mipi_sel = 0
[ 62.714609] [VFE]dev->vip_sel = 0
[ 62.718277] [VFE]dev->isp_sel = 0
[ 62.728643] [VFE_WARN]vfe vpu clock is null
[ 62.739825] sunxi pconf set pin [PE16] func to [1]
[ 62.745170] sunxi pconf set pin [PE17] func to [1]
[ 62.750500] sunxi pconf set pin [PE1] func to [2]
[ 62.755712] [VFE]..........................vfe clk open!.......................
[ 62.764117] [ISP] isp platform_id = 4!
[ 62.768494] [VFE]vfe_init end
[ 62.771821] [VFE]probe_work_handle start!
[ 62.776277] [VFE]v4l2 subdev register input_num = 0
[ 62.781732] axp81x_dldo3: Failed to create debugfs directory
[ 62.788026] axp81x_eldo1: Failed to create debugfs directory
[ 62.794497] [VFE]vfe sensor detect start! input_num = 0
[ 62.800357] [VFE]Find sensor name is "ov4689", i2c address is 6c, type is "RAW" !
[ 62.808697] [VFE]Sub device register "ov4689" i2c_addr = 0x6c start!
[ 62.815790] [VFE]v4l2_device_register_subdev return 0
[ 62.821412] [VFE]registered sensor subdev is OK!
[ 62.826541] [VFE]Check sensor!
[ 62.831259] [VFE]mclk on
[ 62.834089] sunxi pconf set pin [PE1] func to [2]
[ 62.923386] initial VTS 612
[ 62.926483] VTS for denominator = 30 612
[ 62.974848] [VFE]mclk off
[ 62.989800] sunxi pconf set pin [PE1] func to [1]
[ 62.995070] [VFE]Sub device register "ov4689" is OK!
[ 63.000615] [VFE]read ini start
[ 63.004163] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_test_param.ini"
[ 63.040738] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 63.077769] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_3a_param.ini"
[ 63.152804] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_iso_param.ini"
[ 63.228712] [VFE]Fetch ini file form "/system/etc/hawkview/ov4689/isp_tuning_param.ini"
[ 63.300709] [VFE]Fetch table form "/system/etc/hawkview/ov4689/bin/gamma_tbl.bin", gamma num = 1
[ 63.311475] [VFE]V4L2 device registered as video0
[ 63.316736] [VFE]..........................vfe clk close!.......................
[ 63.324991] [VFE]probe_work_handle end!
[ 64.350058] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.361453] sunxi pconf set pin [PF2] func to [2]
[ 64.366680] sunxi pconf set pin [PF3] func to [2]
[ 64.371926] sunxi pconf set pin [PF1] func to [2]
[ 64.377149] sunxi pconf set pin [PF0] func to [2]
[ 64.382384] sunxi pconf set pin [PF5] func to [2]
[ 64.387607] sunxi pconf set pin [PF4] func to [2]
[ 64.410086] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.442380] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 0 err, cmd 52, RTO !!
[ 64.451341] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 0 err, cmd 52, RTO !!
[ 64.459461] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.472086] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.483653] *******************Try sdio*******************
[ 64.490552] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 0 err, cmd 5, RTO !!
[ 64.498574] mmc1: req failed (CMD5): -110, retrying...
[ 64.505097] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 0 err, cmd 5, RTO !!
[ 64.513142] mmc1: req failed (CMD5): -110, retrying...
[ 64.519654] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 0 err, cmd 5, RTO !!
[ 64.527701] mmc1: req failed (CMD5): -110, retrying...
[ 64.534237] [mmc]: *** sunxi_mci_dump_errinfo(L914): smc 0 err, cmd 5, RTO !!
[ 64.542268] *******************Try sd *******************
[ 64.548906] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.559136] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.571749] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.641586] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 64.658963] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 64.669249] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 64.679586] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 64.689879] mmc1: new high speed SDHC card at address aaaa
[ 64.696551] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[ 64.706646] mmcblk1: p1 p2
[ 64.712697] *******************sd init ok*******************
[ 65.771653] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null)
[ 65.779974] SELinux: initialized (dev mmcblk1p1, type ext4), uses xattr
[ 66.122864] SELinux: initialized (dev ecryptfs, type ecryptfs), uses transition SIDs
[ 67.038927] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[ 67.047310] SELinux: initialized (dev mmcblk1p2, type ext4), uses xattr
[ 67.210066] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=a
[ 67.219861] request_suspend_state: wakeup (3->0) at 67219845641 (1970-01-02 00:31:37.865747208 UTC)
[ 67.305363] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[ 67.313316] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 67.319298] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[ 67.325387] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 67.331616] lowmemorykiller: oom_adj 4 => oom_score_adj 235
[ 67.337807] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 67.343995] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 67.388722] SELinux: initialized (dev ecryptfs, type ecryptfs), uses transition SIDs
[ 67.704093] Netatmo_sdcard_grep_MARKER
[ 68.306988] [dsm] Scene:0 "init" (pid:1)
[ 71.301365] CPU7: shutdown
[ 71.321270] CPU6: shutdown
[ 71.341184] CPU5: shutdown
[ 71.361254] CPU4: shutdown
[ 71.381256] CPU3: shutdown
[ 71.411241] CPU2: shutdown
[ 71.451213] CPU1: shutdown
[ 71.460515] CPU1: Booted secondary processor
[ 73.291315] CPU1: shutdown
[ 73.300613] CPU1: Booted secondary processor
[ 75.301282] CPU1: shutdown
[ 75.310583] CPU1: Booted secondary processor
[ 77.401243] CPU1: shutdown
[ 77.410551] CPU1: Booted secondary processor
[ 79.421255] CPU1: shutdown
[ 79.430559] CPU1: Booted secondary processor
[ 81.381253] CPU1: shutdown
[ 81.390553] CPU1: Booted secondary processor
[ 83.401275] CPU1: shutdown
[ 83.410574] CPU1: Booted secondary processor
[ 85.421248] CPU1: shutdown
[ 85.430556] CPU1: Booted secondary processor
[ 87.441247] CPU1: shutdown
[ 87.450549] CPU1: Booted secondary processor
[ 71.420596] CPU2: Booted secondary processor
[ 89.401393] CPU1: shutdown
[ 89.901238] CPU2: shutdown
[ 89.410724] CPU1: Booted secondary processor
[ 89.910544] CPU2: Booted secondary processor
[ 71.390543] CPU3: Booted secondary processor
Jan 2 00:32:01 crond[161]: crond: USER root pid 1523 cmd /system/bin/logwrapper /system/bin/vpn-bin/check_vpn_reconnect.sh
Jan 2 00:32:01 crond[161]: crond: USER root pid 1524 cmd /system/bin/sdcard-bin/check_sd_full.sh > /dev/null
[ 91.521298] CPU3: shutdown
[ 91.541194] CPU2: shutdown
[ 91.581224] CPU1: shutdown
[ 91.590546] CPU1: Booted secondary processor
[ 92.321525] init: untracked pid 168 exited
[ 93.601271] CPU1: shutdown
[ 93.610571] CPU1: Booted secondary processor
[ 95.561328] CPU1: shutdown
[ 95.570582] CPU1: Booted secondary processor
[ 97.581269] CPU1: shutdown
[ 97.590573] CPU1: Booted secondary processor
[ 99.661284] CPU1: shutdown
[ 99.670585] CPU1: Booted secondary processor
[ 101.681271] CPU1: shutdown
[ 101.690575] CPU1: Booted secondary processor
[ 103.661272] CPU1: shutdown
[ 103.670587] CPU1: Booted secondary processor
[ 105.681273] CPU1: shutdown
[ 105.690578] CPU1: Booted secondary processor
[ 107.701256] CPU1: shutdown
[ 107.710563] CPU1: Booted secondary processor
[ 109.781284] CPU1: shutdown
[ 109.790590] CPU1: Booted secondary processor
[ 91.550530] CPU2: Booted secondary processor
[ 111.101342] CPU1: shutdown
[ 111.681272] CPU2: shutdown
[ 111.110639] CPU1: Booted secondary processor
[ 113.781266] CPU1: shutdown
[ 113.790571] CPU1: Booted secondary processor
[ 115.801259] CPU1: shutdown
[ 115.810560] CPU1: Booted secondary processor
[ 117.821260] CPU1: shutdown
[ 118.120889] healthd: battery l=0 v=0 t=30.0 h=2 st=2 c=0 chg=a
[ 117.830566] CPU1: Booted secondary processor
[ 119.901270] CPU1: shutdown
[ 119.910572] CPU1: Booted secondary processor
[ 121.581279] CPU1: shutdown
[ 121.590586] CPU1: Booted secondary processor
[ 123.901257] CPU1: shutdown
[ 123.910568] CPU1: Booted secondary processor
[ 125.921271] CPU1: shutdown
[ 125.930579] CPU1: Booted secondary processor
[ 127.941270] CPU1: shutdown
[ 127.950578] CPU1: Booted secondary processor
[ 129.741277] CPU1: shutdown
[ 129.750578] CPU1: Booted secondary processor
[ 131.326859] request_suspend_state: sleep (0->3) at 131326841797 (1970-01-02 00:32:41.972743363 UTC)
[ 111.690573] CPU2: Booted secondary processor
[ 131.372106] [dsm] Scene:0 "init" (pid:1)
[ 131.389313] [dsm] Scene:0 "init" (pid:1)
[ 132.501296] CPU1: shutdown
[ 132.841282] CPU2: shutdown
[ 132.510599] CPU1: Booted secondary processor
[ 136.041314] CPU1: shutdown
[ 136.050609] CPU1: Booted secondary processor
[ 138.061235] CPU1: shutdown
[ 138.070561] CPU1: Booted secondary processor
[ 140.141272] CPU1: shutdown
[ 140.150581] CPU1: Booted secondary processor
[ 142.181214] CPU1: shutdown
[ 142.190517] CPU1: Booted secondary processor
[ 144.201233] CPU1: shutdown
[ 144.210543] CPU1: Booted secondary processor
[ 146.161264] CPU1: shutdown
[ 146.170577] CPU1: Booted secondary processor
[ 148.181270] CPU1: shutdown
[ 148.190574] CPU1: Booted secondary processor
[ 150.201276] CPU1: shutdown
[ 150.210575] CPU1: Booted secondary processor
[ 152.281268] CPU1: shutdown
[ 152.290569] CPU1: Booted secondary processor
[ 154.321255] CPU1: shutdown
[ 154.330557] CPU1: Booted secondary processor
[ 156.341273] CPU1: shutdown
[ 156.350577] CPU1: Booted secondary processor
[ 158.301277] CPU1: shutdown
[ 158.310580] CPU1: Booted secondary processor
[ 160.321255] CPU1: shutdown
[ 160.330555] CPU1: Booted secondary processor
[ 162.341274] CPU1: shutdown
[ 162.350575] CPU1: Booted secondary processor
[ 164.441270] CPU1: shutdown
[ 164.450569] CPU1: Booted secondary processor
[ 166.461265] CPU1: shutdown
[ 166.470567] CPU1: Booted secondary processor
[ 168.421270] CPU1: shutdown
[ 168.430573] CPU1: Booted secondary processor
[ 170.441268] CPU1: shutdown
[ 170.450566] CPU1: Booted secondary processor
[свернуть]

М
Devastator
Длинные логи прячем в спойлер
Последний раз редактировалось Devastator; 12.09.2019 в 10:10. Причина: Спойлер