С помощью Signal Probing нашел распин zte v956, не нашел только NRST, ресет приходит, но не видит флеш. Кто знает что делать дальше??

Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
  Device on TAP #0: ID = 0x008E00E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]

Resetting target...OK
STATUS: Target is halted.

  R0 = 0x80000474    R6 = 0x80012FC4    R12 = 0x00000000
  R1 = 0x80009BB0    R7 = 0x8000F8AC    R13 = 0x80012F88
  R2 = 0x5BE0CD19    R8 = 0x00000000    R14 = 0xFFFF6B5C
  R3 = 0x80009DE4    R9 = 0xFFFFCE04    R15 = 0xFFFF71FC
  R4 = 0x80004278   R10 = 0x00000AAE   CPSR = 0x800000D3
  R5 = 0x00000000   R11 = 0x00000014



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Custom Target: [ARM920T, 1.80V, TAP0]

Connecting to the ARM920T target...OK
Detected Target ID on TAP0: 0x008E00E1
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x12000000000000000000000100000000

Resurrection sequence started.
Establish communication with the phone...OK
Uploading loader data into memory...FAILED
ERROR: Memory access timed out.
Последний раз редактировалось Sergey; 10.06.2014 в 22:56.