Телефон после довольно сильного падения, при включении показывает надпись Nokia и уходит в циклическую перезагрузку. Не получается прошить, хотя бут восстанавливается без ошибок.

Лог ошибки ATF при прошивке:

Полный текст

Windows Phone Flashing Started

OSBL File Found:
RM803_12w46_prod_generic_nokia_osbl.esco
AMSS File Found:
RM803_12w46_prod_generic_amss.esco
ADSP File Found:
RM803_12w46_prod_generic_adsp.esco
WPOS File Found:
RM803_12460_prod_231_05_boot.esco
USER AREA ERASE File Found:
RM803_12w46_prod_generic_user_area_erase.esco

======================================================
Windows Phone Lumia Flasher
======================================================

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Press and Hold the VOLUME UP button
2. Connect it to the USB Port while still Pressing
the VOLUME UP button
3. Continue to Press the VOLUME UP button for 8 more
seconds
======================================================


Sending OSBL Certificate
HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes
Status : WRITE OSBL CERTIFICATE SUCCESS

Sending OSBL Data Blocks
[BLOCK 1 0x00000000~0x000EA227]
Data Size: 0x000EA228 Bytes
SHA-256 : 230DC86974519BE07B69E337C9F85A50
---------- : 9739D18813437F34B57702302888FD05

ERROR: Data Rejected at SEQ 0x12
Status : OSBL WRITE FAILED
[свернуть]
______________________________
ПРАВИЛА нашего форума