Сообщение от P45 Посмотреть сообщение
post log from read dump in DCC tab
Думаю что это мало чем поможет, вот лог

лог


[23.02.2013 14:18:44] [START OPERATION_ID = DCC_READ_MEMORY]
[23.02.2013 14:18:44]
[23.02.2013 14:18:44] Current Settings:
[23.02.2013 14:18:44] -----------------
[23.02.2013 14:18:44] Address: 000000000000
[23.02.2013 14:18:44] Length: 000000000000
[23.02.2013 14:18:44] Address Space: ROM1
[23.02.2013 14:18:44] AutoFullFlash: CHECKED
[23.02.2013 14:18:44] Use End Address: UNCHECKED
[23.02.2013 14:18:44] ECC Module Enabled: UNCHECKED
[23.02.2013 14:18:44] Image File is Used: UNCHECKED
[23.02.2013 14:18:44] Use Address as Offset: UNCHECKED
[23.02.2013 14:18:44] Main (UNCHECKED):
[23.02.2013 14:18:44] Redu (UNCHECKED):
[23.02.2013 14:18:44]
[23.02.2013 14:18:55] Open serial port...OK
[23.02.2013 14:18:55] Connecting to the RIFF Box...OK
[23.02.2013 14:18:55] Firmware Version: 1.34, JTAG Manager Version: 1.48
[23.02.2013 14:18:55] Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4798.9590]
[23.02.2013 14:18:55]
[23.02.2013 14:18:55] Connecting to the dead body...OK
[23.02.2013 14:18:55] Detected dead body ID: 0x007700E1 - CORRECT!
[23.02.2013 14:18:55] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[23.02.2013 14:18:55] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[23.02.2013 14:18:55] Settings Code: 0x04010000000000000000000000000000
[23.02.2013 14:18:55]
[23.02.2013 14:18:55] Resurrection sequence started.
[23.02.2013 14:18:55] Establish communication with the phone...OK
[23.02.2013 14:18:55] Initializing internal hardware configuration...OK
[23.02.2013 14:18:55] Uploading resurrector data into memory...OK
[23.02.2013 14:18:55] Starting communication with resurrector...FAILED
[23.02.2013 14:18:55] ERROR: No response from the RIFF Box.
[23.02.2013 14:18:55] [FINISH OPERATION_ID = DCC_READ_MEMORY]
[свернуть]
______________________________
ПРАВИЛА нашего форума